返回首页
加入收藏
联系我们
|
| 规格 standards |
单位 unit |
GTS-4008AHR* | GTS-4008AHD | GTS-4008AMSI | GTS-4010AHR | GTS-4010AHD | GTS-4010MSI | GTS-4012AHR | GTS-4012AHD | GTS-4012MSI | ||
| 能力 capacity |
工作台工作面积available area of working table |
mm |
800*400 | 800*400 | 800*400 | 1000*400 | 1000*400 | 1000*400 | 1200*400 | 1200*400 | 1200*400 | |
| 左右最大移动量 maximum moving dimension from left to right |
mm |
900 | 900 | 900 | 1150 | 1150 | 1150 | 1350 | 1350 | 1350 | ||
| 前后最大移动量maximum moving dimension from front to back | 不装大墙板 |
mm |
450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | |
| 装大墙板 |
mm |
440 | 440 | 440 | 440 | 440 | 440 | 440 | 440 | 440 | ||
| 工作台面至主轴中心最大距离maximum distance from surface of working table to spindle |
mm |
600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | ||
| 工作台最大承受重量maximum bearing weightof working table |
Kgs |
550 | 550 | 550 | 550 | 550 | 550 | 550 | 550 | 550 | ||
|
工作台working table |
工作台T型槽slot in working table |
mmxN |
14-3 | 14-3 | 14-3 | 14-3 | 14-3 | 14-3 | 14-3 | 14-3 | 14-3 | |
|
工作台速度speed of working table |
m/min |
5-25 | 5-25 | 5-25 | 5-25 | 5-25 | 5-25 | 5-25 | 5-25 | 5-25 | ||
|
工作台轨道 |
m/min |
-V平滑动轨道 | -V平滑动轨道 | -V平滑动轨道 | -V平滑动轨道 | -V平滑动轨道 | -V平滑动轨道 | -V平滑动轨道 | -V平滑动轨道 | -V平滑动轨道 | ||
|
前后手轮进刀fornt & rea handwheel feed |
一格a check |
mm |
0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | |
|
1圈a circle |
mm |
4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | ||
|
前后自动进给auto-supplying from front to back |
mm |
0.1-10 | 0.1-10 | 0.1-10 | 0.1-10 | 0.1-10 | 0.1-10 | 0.1-10 | 0.1-10 | 0.1-10 | ||
|
前后快速移动high speed moving from front to back |
50HZ |
mm |
820 | 820 | 820 | 820 | 820 | 820 | 820 | 820 | 820 | |
|
60HZ |
mm |
980 | 980 | 980 | 980 | 980 | 980 | 980 | 980 | 980 | ||
|
砂轮grinding wheel |
砂轮尺寸 measurement of grinding wheel |
mm |
355*(20-40)*127 | 355*(20-40)*127 | 355*(20-40)*127 | 355*(20-40)*127 | 355*(20-40)*127 | 355*(20-40)*127 | 355*(20-40)*127 | 355*(20-40)*127 | 355*(20-40)*127 | |
|
主轴转速 rotational speed of spindle |
50HZ |
R.p.m |
1450 | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | |
|
60HZ |
R.p.m |
1740 | 1740 | 1740 | 1740 | 1740 | 1740 | 1740 | 1740 | 1740 | ||
|
上下结构up and down structure |
最大移动量maximum moving dimension |
mm |
500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | |
|
上下手轮进刀up& down handwheel feed |
一格a check |
mm |
0.002 | 0.002 | 0.002 | 0.002 | 0.002 | 0.002 | 0.002 | 0.002 | 0.002 | |
|
1回转a turing round |
mm |
0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | ||
|
自动进给量auto-supplying volumn |
mm |
/ | 0.001-0.04 | 0.001-0.04 | 0.001-0.04 | 0.001-0.04 | 0.001-0.04 | 0.001-0.04 | ||||
|
上下快速移动量 high-speed moving dimension from up to down |
m/min |
130 | 130 | 130 | 130 | 130 | 130 | 130 | 130 | 130 | ||
|
马达motor |
主轴马达spindle motor |
HXP |
7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | 7.5*4 | |
|
上下驱动马达 up and down driving motor |
W |
80 | 400 | 400 | 80 | 400 | 400 | 80 | 400 | 400 | ||
|
油压马达oil pressure motor |
HXP |
3-6 | 3-6 | 3-6 | 3-6 | 3-6 | 3-6 | 3-6 | 3-6 | 1/2*2 | ||
|
吸尘马达dust catching motor |
HXP |
1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | ||
|
冲水马达dust catching motor |
HXP |
1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | ||
|
前后驱动马达back and front driving motor |
W | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | ||
|
尺寸dimension |
机器高度machine height |
mm |
1980 | 1980 | 1980 | 1980 | 1980 | 1980 | 1980 | 1980 | 1980 | |
|
占地面积 covering area |
mm |
2300*3850 | 2300*3850 | 2300*3850 | 2300*4050 | 2300*4050 | 2300*4050 | 2300*3850 | 2300*3850 | 2300*3850 | ||
|
净重 net weight |
kgs |
2600 | 2600 | 2600 | 2700 | 2700 | 2700 | 2800 | 2800 | 2800 | ||
|
毛重 gross weight |
kgs |
3000 | 3000 | 3000 | 3100 | 3100 | 3100 | 3200 | 3200 | |||
