返回首页
加入收藏
联系我们
|
| 规格 standards |
单位 unit |
GTS-6010AHR | GTS-6010AHD | GTS-6010MSI | GTS-6016AHR | GTS-6016AHD | GTS-6016MSI | GTS-6020AHR | GTS-6020AHD | GTS-6020MSI | ||
| 能力 capacity |
工作台工作面积available area of working table |
mm |
1000*600 | 1000*600 | 1000*600 | 1600*600 | 1600*600 | 1600*600 | 2000*600 | 2000*600 | 2000*600 | |
| 左右最大移动量 maximum moving dimension from left to right |
mm |
1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | ||
| mm | 640 | 640 | 640 | 640 | 640 | 640 | 640 | 640 | 640 | |||
| 前后最大移动量maximum moving dimension from front to back | 不装大墙板 |
mm |
700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | |
| 装大墙板 | ||||||||||||
| 工作台面至主轴中心最大距离maximum distance from surface of working table to spindle |
mm |
800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | ||
| 工作台最大承受重量maximum bearing weightof working table |
Kgs |
16*3 | 16*3 | 16*3 | 16*3 | 16*3 | 16*3 | 16*3 | 16*3 | 16*3 | ||
|
工作台working table |
工作台T型槽slot in working table |
mmxN |
10-25 | 10-25 | 10-25 | 10-25 | 10-25 | 10-25 | 10-25 | 10-25 | 10-25 | |
| 工作台速度speed of working table | ||||||||||||
|
工作台轨道 |
m/min |
-V-平滑动导航 |
-V-平滑动导航 |
-V-平滑动导航 |
-V-平滑动导航 |
-V-平滑动导航 |
-V-平滑动导航 |
-V-平滑动导航 |
-V-平滑动导航 |
-V-平滑动导航 | ||
|
前后手轮进刀fornt & rea handwheel feed |
一格a check |
mm |
0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | |
|
1圈a circle |
mm |
4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | ||
|
前后自动进给auto-supplying from front to back |
mm |
0.5-12 | 0.5-12 | 0.5-12 | 0.5-12 | 0.5-12 | 0.5-12 | 0.5-12 | 0.5-12 | 0.5-12 | ||
|
前后快速移动high speed moving from front to back |
50HZ |
mm |
1250 | 1250 | 1250 | 1250 | 1250 | 1250 | 1250 | 1250 | 1250 | |
|
60HZ |
mm |
1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | ||
|
砂轮grinding wheel |
砂轮尺寸 measurement of grinding wheel |
mm |
355*(20-50)*127 | 355*(20-50)*127 | 355*(20-50)*127 | 355*(20-50)*127 | 355*(20-50)*127 | 355*(20-50)*127 | 355*(20-50)*127 | 355*(20-50)*127 | 355*(20-50)*127 | |
|
主轴转速 rotational speed of spindle |
50HZ |
R.p.m |
1450 | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | 1450 | |
|
60HZ |
R.p.m |
1750 | 1750 | 1750 | 1750 | 1750 | 1750 | 1750 | 1750 | 1750 | ||
|
上下结构up and down structure |
550 |
550 |
550 |
550 |
550 |
550 |
550 |
550 |
550 | |||
|
上下手轮进刀up& down handwheel feed |
一格a check |
mm |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 | |
|
1回转a turing round |
mm |
0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | ||
|
自动进给量auto-supplying volumn |
mm |
/ |
0.001-0.04 |
0.001-0.04 |
/ |
0.001-0.04 |
0.001-0.04 |
/ |
0.001-0.04 |
0.001-0.04 | ||
|
上下快速移动量 high-speed moving dimension from up to down |
m/min |
230 | 230 | 230 | 230 | 230 | 230 | 230 | 230 | 230 | ||
|
马达motor |
主轴马达spindle motor |
HXP |
15*4 | 15*4 | 15*4 | 15*4 | 15*4 | 15*4 | 15*4 | 15*4 | 15*4 | |
| 油压马达oil pressure motor | HXP | 7.5*6 | 7.5*6 | 7.5*6 | 7.5*6 | 7.5*6 | 7.5*6 | 7.5*6 | 7.5*6 | 7.5*6 | ||
| 吸尘马达dust catching motor |
HXP |
1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | ||
|
吸尘马达dust catching motor |
HXP |
1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | ||
| 上下驱动马达 up and down driving motor | W | 1/2*4 | 750 | 750 | 1/2*4 | 1/2*4 | 750 | 1/2*4 | 750 | 750 | ||
|
前后驱动马达back and front driving motor |
W |
1/5*8 | 1/5*8 | 1/5*8 | 1/5*8 | 1/5*8 | 1/5*8 | 1/5*8 | 1/5*8 | 1/5*8 | ||
|
尺寸dimension |
机器高度machine height |
mm |
2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | |
|
占地面积 covering area |
mm |
2350*4500 | 2350*4500 | 2350*4500 | 2350*5300 | 2350*5300 | 2350*5300 | 2350*5300 | 2350*5300 | 2350*5300 | ||
|
净重 net weight |
kgs |
6500 | 6500 | 6500 | 6500 | 6500 | 6500 | 6500 | 6500 | 6500 | ||
|
毛重 gross weight |
kgs |
6000 | 6000 | 6000 | 7500 | 7500 | 7500 | 7500 | 7500 | 7500 | ||
AHR:前后/左右/上下快动 HAD:前后/左右/上下自动 MSI:左右油压自动/前后.上下自动(带手持编码器)
