返回首页
加入收藏
联系我们
|
| 规格 standards |
单位 unit |
GTS-250m* | GTS-250H | GTS-250AH | GTS-250AHR* | GTS-250AHD | GTS-250MSI | ||
| 能力 capacity |
工作台工作面积available area of working table |
mm |
460*200 | 460*200 | 460*200 | 460*200 | 460*200 | 460*200 | |
| 左右最大移动量 maximum moving dimension from left to right |
mm |
540 | 540 | 540 | 540 | 540 | 540 | ||
| 前后最大移动量maximum moving dimension from front to back | 不装大墙板 |
mm |
280 | 280 | 280 | 280 | 280 | 280 | |
| 装大墙板 | mm | 240 | 240 | 240 | 240 | 240 | 240 | ||
| 工作台面至主轴中心最大距离maximum distance from surface of working table to spindle |
mm |
475 | 475 | 240 | 475 | 475 | 475 | ||
| 工作台最大承受重量maximum bearing weightof working table |
Kgs |
100 | 100 | 100 | 100 | 100 | 100 | ||
|
工作台working table |
工作台T型槽slot in working table |
mmxN |
14*1 | 100 | 100 | 100 | 100 | 100 | |
|
工作台速度speed of working table |
m/min |
/ | 15-23 | 15-23 | 15-23 | 15-23 | 15-23 | ||
|
前后手轮进刀fornt & rea handwheel feed |
一格a check |
mm |
0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | |
|
1圈a circle |
mm |
4 | 4 | 4 | 4 | 4 | 4 | ||
|
前后自动进给auto-supplying from front to back |
mm |
/ | / | 0.1-8 | 0.1-8 | 0.1-8 | 0.1-8 | ||
|
前后快速移动high speed moving from front to back |
50HZ |
mm |
/ | / | 820 | 820 | 820 | 820 | |
|
60HZ |
mm |
/ | / | 980 | 980 | 980 | 980 | ||
|
砂轮grinding wheel |
砂轮尺寸 measurement of grinding wheel |
mm |
205*(6-20)31.75 | 205*(6-20)31.75 | 205*(6-20)31.75 | 205*(6-20)31.75 | 205*(6-20)31.75 | 205*(6-20)31.75 | |
|
主轴转速 rotational speed of spindle |
50HZ |
R.p.m |
2850 | 2850 | 2850 | 2850 | 2850 | 2850 | |
|
60HZ |
R.p.m |
3360 | 3360 | 3360 | 3360 | 3360 | 3360 | ||
|
上下结构up and down structure |
最大移动量maximum moving dimension |
mm |
420 | 420 | 420 | 420 | 420 | 420 | |
|
上下手轮进刀up& down handwheel feed |
一格a check |
mm |
0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | |
|
1回转a turing round |
mm |
2 | 2 | 2 | 2 | 2 | 2 | ||
|
自动进给量auto-supplying volumn |
mm |
/ | / | / | / | / | / | ||
|
上下快速移动量 high-speed moving dimension from up to down |
m/min |
/ | / | / | / | / | / | ||
|
马达motor |
主轴马达spindle motor |
HXP |
2*2 | 2*2 | 2*2 | 2*2 | 2*2 | 2*2 | |
|
上下驱动马达 up and down driving motor |
W |
/ | / | 1/ | 80 | 400 | 400 | ||
|
油压马达oil pressure motor |
HXP |
1*4 | 1*4 | 1*4 | 1*4 | 1*4 | 1*4 | ||
|
吸尘马达dust catching motor |
HXP |
1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | 1/2*2 | ||
|
冲水马达dust catching motor |
HXP |
1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | 1/8*2 | ||
|
前后驱动马达back and front driving motor |
W |
/ | / | 40 | 40 | 40 | 40 | ||
|
尺寸dimension |
机器高度machine height |
mm |
1175 | 1175 | 1175 | 1175 | 1175 | 1175 | |
|
占地面积 covering area |
mm |
1800*1400 | 1800*1400 | 1800*1400 | 1800*1400 | 1800*1400 | 1800*1400 | ||
|
净重 net weight |
kgs |
1300 | 1300 | 1300 | 1300 | 1300 | 1300 | ||
|
毛重 gross weight |
kgs |
1500 | 1500 | 1500 | 1500 | 1500 | 1500 | ||
